- What size crimp cover should I use?
- What sizes do crimp beads come in?
- Can I use fishing line for beading?
- What do crimp beads look like?
- How do I stop my beads from spinning?
- What to do with lots of beads?
- What is the difference between a crimp bead and a crimp tube?
- Why do my crimp beads keep breaking?
- Do you need a crimp cover?
- Can you use crimp beads on thread?
- What can I use instead of crimp beads?
What size crimp cover should I use?
For those designs where you want to disguise crimped crimp beads, choose crimp covers in the metal and size that suits your design – 3mm crimp covers work well at covering most 1x1mm-2x3mm crimps.
However, if your design has 4mm metal beads in it then you may prefer to use 4mm crimp covers..
What sizes do crimp beads come in?
Beadalon – Match Up Proper Wire & Crimp Bead or Tube DiametersCrimp Bead SizeWire DiameterCrimp Tool#0.010″ – .013″ (.25-.33mm)Micro#1.010″ – .021″ (.25-.53mm)Micro#2.024″ – .026″ (.60-.66mm)Standard#3.024″ – .036″ (.60-.91mm)Mighty
Can I use fishing line for beading?
It’s a strong thread for beadweaving It’s there because the Power Pro thread used for beading is the same as the thread used for fishing. … However, if you are buying the fishing line version, be sure to buy the one called braided line (or braid line) that works especially well for bead weaving.
What do crimp beads look like?
Crimp beads are shaped like a hollow round bead and come in a variety of sizes and metals. To secure them to jewelry wire, flatten the crimp bead with a pair of flat or chain nose pliers. The flattened bead grips the jewelry wire.
How do I stop my beads from spinning?
To stop them rotating beads can also be mounted on very tight wires, or by making tight loops where the wires exit. You can also file a short groove in the hole with a bead reamer and flatten part of the wire with pliers to fit, or tighten a loop against it or, or a hundred and one things.
What to do with lots of beads?
7 Ideas for What To Do With Leftover BeadsMake Earrings. I love earring patterns. … Use As Accent Beads. … Create Beaded Fringe. … Make A Bead Mix. … Create A Bead Soup. … Make A Repair Kit. … Give Leftover Beads Away.
What is the difference between a crimp bead and a crimp tube?
Tubes may do a better job of gripping beading wire because they tend to have a larger interior surface area. Crimp tubes also allow you to use crimping pliers which make your crimps look less like tubes and more like beads that are part of your design. Crimp beads, however, are often more economical than tubes.
Why do my crimp beads keep breaking?
Breakage is typically caused by abrasion on the wire. The kinds of beads you’re can be sharp on the inside and can cut through the wire over time.
Do you need a crimp cover?
You can use crimp covers to hide crimp beads when you’re making jewelry. They are designed to look just like a spacer bead and are great for adding a decorative touch to finish off your project.
Can you use crimp beads on thread?
Can crimp beads be used with thread? The metal edges of a crimp bead can cut or fray thread when crimping so it is not recommended to use crimps when designing with thread. Instead, use knots with bead tips or French wire for a professional finish to your designs.
What can I use instead of crimp beads?
An alternative to crimp beads and crimp tubes is a newer finding called Screw-Tite Crimps™. Screw-Tite Crimps not only secure your Accu-Flex® beading wire to your clasp, they also allow you to change your clasp for a different one, should you want a different look.